Round headlights, a flat grille, and a boxy body. The classic Toyota Land Cruiser look has fans who have never read a spec sheet in their lives. If you want a retro Land Cruiser in your driveway, the look is the easy part. The hard part is deciding how much old-truck ownership you want to go with it.
There are four ways to get there. You can buy an original truck, a restored one, or a restomod with modern mechanical parts. Or you can buy a newer Land Cruiser that has been restyled with a retro front end, which is what our Renoca line does.
We sell classic Land Cruisers imported from Japan, and we offer the Renoca, which is converted in San Diego. This guide compares all four options on price, daily driving, parts, and resale, so you can pick the one that fits how you will use the truck.
- Quick Answer: Four Ways to Get a Retro Land Cruiser
- Which Land Cruisers Have the Retro Look?
- Option 1: An Original Land Cruiser
- Option 2: A Restored Land Cruiser
- Option 3: A Land Cruiser Restomod
- Option 4: Renoca, a Retro Look on a Newer Land Cruiser
- Side by Side: Daily Driving, Parts, and Resale
- Which One Should You Buy?
- What to Check Before Buying Any Retro Land Cruiser
- Frequently Asked Questions
- Conclusion

Quick Answer: Four Ways to Get a Retro Land Cruiser
| Original | Restored | Restomod | Renoca | |
|---|---|---|---|---|
| What it is | An unrestored classic, as built | A classic returned to factory condition | A classic body with modern engine, brakes, and comforts | A 1990s or 2000s Land Cruiser with a retro front end and new paint |
| Typical price | Market benchmarks of about $29,000 to $36,000 for the FJ40, FJ62, and 70 Series | Varies widely with the quality of the work | Builder prices reported from $125,000 to more than $200,000 | Listed from $39,995, depending on the base vehicle and options |
| Daily driving | Possible, but basic | Same as original | Good | Good |
| Parts and service | Classic-truck parts supply | Classic-truck parts supply | Depends on the builder | Same as a Land Cruiser 80 or 100 |
| Best for | Purists and collectors | Buyers who want a classic that is finished | Buyers with a large budget who want one truck that does both | Buyers who love the look and want to drive it every day |
Prices are as of November 2026. Sources for each figure are in the sections below.
Which Land Cruisers Have the Retro Look?
Three generations define the classic Land Cruiser look in the US.
- 40 Series (FJ40). The short, upright two-door with round headlights. According to Toyota, the FJ40 came to the US in 1960, and US sales ended in 1983.
- 60 Series (FJ60 and FJ62). The four-door wagon of the 1980s. Early trucks have round headlights, and later ones have four square lights. Our FJ60 history guide and FJ60 vs. FJ62 comparison cover the details.
- 70 Series. The boxy workhorse that replaced the 40 Series in many markets from 1984. Toyota never sold it in the US, so every 70 Series here is an import.
The Renoca 106 and Wonder borrow the face of the 60 Series. That is the look this guide keeps coming back to.

Option 1: An Original Land Cruiser
What You Get
An original truck is the real thing. It has the factory engine, the factory interior, and the wear that comes with decades on the road. For a collector, that originality is the whole point.
It also drives like a truck from its era. In Toyota’s own history of the model, the 1979 FJ40 is described as having neither air conditioning nor power steering. Airbags and anti-lock brakes arrived later, in the 80 Series years of the 1990s. The 60 Series of the 1980s is more comfortable than the FJ40, but it is still a carbureted or early fuel-injected truck with modest power. Toyota lists the 1988 engine at 155 horsepower.
Prices for original trucks vary widely with condition. As of November 13, 2026, Classic.com’s market benchmarks sit at about $36,000 for the FJ40, about $34,000 for the FJ62, and about $29,000 for the 70 Series. Individual trucks sell well above and below those figures.
The JDM Route: Importing a 60 or 70 Series
Many Japanese-market Land Cruisers came with diesel engines and trims never offered here. A vehicle that is at least 25 years old can be imported without meeting current federal safety standards, which is why 1980s and 1990s trucks from Japan are now offered for sale in the US.
As of November 13, 2026, our inventory lists five Land Cruiser 60 trucks and 13 Land Cruiser 70 trucks in Japan as available for import. Most have been refreshed before sale, with work such as a repaint, a round-headlight conversion, a lift kit, or new wheels and audio. Each listing describes what was done, so you can see how close a truck is to factory condition. Our 70 Series import guide explains how the process works.

Option 2: A Restored Land Cruiser
Frame-Off vs. Cosmetic Restoration
“Restored” covers a lot of ground. The two ends of the range are:
- Frame-off restoration. The body comes off the chassis, and every component is inspected, rebuilt, or replaced.
- Cosmetic restoration. The work focuses on appearance and basic function. It suits a truck that already has a sound frame and healthy mechanical parts.
Those definitions come from Corsetti Cruisers, a Land Cruiser restoration shop. The difference matters because both kinds of truck are advertised with the same word. Ask the seller for photos of the work in progress, receipts, and a list of what was replaced.
What Restored Land Cruisers Cost
Restoration is labor. Corsetti Cruisers publishes its own ranges. As of November 2026, they are $50,000 to $100,000 for a repaint and refresh, and $190,000 to $300,000 for a full frame-off build. That top tier includes engine and transmission upgrades, so it goes beyond a factory-correct restoration. In 2020, 4×4 Australia reported a starting price of $100,000 for a frame-off rebuild by Legacy Overland.
Owner reports tell a similar story on a smaller scale. In a 2019 IH8MUD thread, several members advised buying a finished FJ40 instead of commissioning a restoration. One suggested paying $30,000 to $40,000 for a finished truck, because a proper restoration would cost upwards of twice that. The thread starter passed on the story of a buyer who was promised a rebuilt truck in six months and waited more than three years.
The lesson for a buyer: a finished, documented restoration is usually cheaper than commissioning one.
Option 3: A Land Cruiser Restomod
What a Restomod Is
A restomod keeps the classic body and replaces what is underneath. Hagerty, the classic car insurer, describes restomods as “vehicles with a modernized drive train and safety features.” In a Land Cruiser, that usually means a modern engine, upgraded brakes and suspension, air conditioning, and a new interior.
The result looks like a 1970s or 1980s truck and drives like a much newer one.
Builders and Reported Prices
Several specialist builders work in this part of the market. Gear Patrol’s 2021 report on Corsetti Cruisers describes about 2,200 hours of work per truck, and the prices reflect that. These are the figures reported by the press, with the year of each report:
| Builder | Reported price | Source and year |
|---|---|---|
| The FJ Company | From $180,000, with a 12-to-18-month waiting list | The Drive, 2019 |
| ICON 4×4 | $195,000 to $210,000 by body style | MotorBiscuit, 2022 |
| TLC Automotive | Restomod builds from $125,000 | Motor1, 2021 |
| Corsetti Cruisers | $135,000 for a series build | Gear Patrol, 2021 |
These are past reports, not current quotes. Contact each builder for today’s price and lead time.
A restomod gives you the look and the comfort in one truck. The cost is the obstacle. Going by the figures in this guide, it is several times the price of an original truck or a Renoca.
Option 4: Renoca, a Retro Look on a Newer Land Cruiser
What Renoca Is
Renoca is our own line, and the name combines “renovation” and “car.” The idea runs in the opposite direction from a restomod. A restomod puts new parts under an old body. A Renoca starts with a newer Land Cruiser and gives it a retro face.
We take a used Land Cruiser 80 or 100 Series, fit a retro-style front end, repaint the whole vehicle, and refresh the interior. The conversion does not swap the engine, transmission, or four-wheel-drive system. They remain those of the base Land Cruiser.

The Models: 106, Wonder, and Phoenix
- Renoca 106. Based on the Land Cruiser 100 Series or the Lexus LX 470, with a V8 and a 60 Series-style front end. You can choose round or square headlights. Our LC100-to-FJ60 retrofit article shows how the look comes together.
- Renoca Wonder. Based on the Land Cruiser 80 Series, with 60 Series-style round headlights and a single-color body.
- Renoca Phoenix. Also based on the 80 Series, with a more angular front, a rounded hood, and two-tone paint.
There is also the Windansea, which applies the same idea to a Toyota Tacoma.
Specifications depend on the used vehicle each build starts with. As a guide, the 80 Series from the 1993 model year uses a 4.5-liter inline-six that Toyota rated at 212 horsepower, and the 100 Series uses a 4.7-liter V8. Our product pages list a four-speed automatic for both.


What Changes and What Stays Stock
What changes:
- The front end is replaced with a Renoca kit. The kits are made in Japan, shipped to San Diego, and installed at auto body shops that meet FLEX quality standards.
- The body gets a full repaint in the color you choose.
- The interior can be fitted with our seat covers and other upgrades.
- Options include tires and wheels, a suspension lift, roof racks, Apple CarPlay and Android Auto, navigation, and a backup camera.
What stays stock:
- The engine, transmission, and drivetrain of the base Land Cruiser.
- The frame and body structure behind the front end.
That second list is the reason a Renoca is easy to live with. The mechanical parts are those of a Land Cruiser 80 or 100, so any shop that knows those trucks can work on them. The Renoca conversion itself is offered only by FLEX.

Prices and How Ordering Works
As of November 2026, our product pages list the Wonder from $39,995, and the 106 and the Phoenix from $43,995. The price varies with the cost of the base vehicle and the options you choose. If you already own a suitable Land Cruiser or Lexus LX, you can bring it in. Conversion pricing starts at $22,000 for the Wonder and Phoenix and $25,000 for the 106.
Finished trucks also come up for sale. As of November 13, 2026, we have a 1996 Renoca Wonder listed at $44,999.
A build to order follows four phases: consultation and base vehicle selection, the retrofit and paint, interior and accessories, and handover. Our article on how a Renoca is made describes the full process as taking 13 to 23 weeks. Each truck receives a serial number plate.
Side by Side: Daily Driving, Parts, and Resale
Daily Driving and Comfort
This is where the four options separate most clearly.
An original or restored FJ40 or FJ60 gives you the driving experience of its decade. That is part of the charm, and it is also a reason to think twice before making one your only vehicle.
A restomod and a Renoca both aim at everyday use. The restomod gets there with new mechanical parts. The Renoca gets there because its base truck is newer. By 1991, Toyota notes, the Land Cruiser already offered leather seats, air conditioning, and upgraded audio, and airbags and anti-lock brakes followed during the 80 Series years.
Parts and Service
Parts for 40 and 60 Series trucks are available, but you will lean on specialists and the enthusiast community. A restomod depends on its builder’s choices, so ask what engine and components were used and who can service them.
A Renoca uses Land Cruiser 80 or 100 Series mechanical parts. Only the front-end kit is specific to the build.

Authenticity and Resale
On authenticity, the original truck wins by definition.
A Renoca is a modified vehicle. It is not a classic Land Cruiser, and a collector who wants factory-correct parts should not buy one. The same is true, to a different degree, of a restomod. In a 2020 IH8MUD thread on this exact question, one owner’s advice was to build a truck stock if the plan is to sell it.
If resale to collectors matters most to you, buy original. If you are buying to drive, the question matters less.
One practical note: tell your insurer about any modifications. Hagerty’s guide to classic car insurance says modifications are not covered automatically and should be documented with photos and receipts.
Which One Should You Buy?
- You want a piece of Land Cruiser history. Buy an original. If you look at imports from Japan, check how much of the truck is still factory.
- You want a classic that is finished and ready to show. Buy a documented restoration instead of starting one.
- You want the classic body with modern performance, and budget is not the limit. Talk to a restomod builder, and expect a wait.
- You love the retro look and want to drive it to work. Look at a Renoca. You get the style with a 1990s or 2000s Land Cruiser underneath, for far less than the restomod prices reported above.
What to Check Before Buying Any Retro Land Cruiser
- Title and VIN. Confirm that the title is clean and that the VIN matches the vehicle. For an import, ask for the import documents.
- Rust. Check the frame, floors, rocker panels, and tailgate on any older truck, and the frame on any base vehicle.
- Documentation of the work. For a restoration, restomod, or conversion, ask for photos, receipts, and a parts list.
- The builder. Ask how many trucks the shop has built and whether you can speak with past customers.
- The base vehicle. For a Renoca or any conversion, ask for the service history of the truck it started as.
- Recalls. Run the VIN at NHTSA for any US-market vehicle.
Our used Land Cruiser buying guide covers what to check on each series.
Frequently Asked Questions
What is a retro Land Cruiser?
Most people mean a Land Cruiser with the classic look of the 40, 60, or 70 Series. That can be an original truck, a restored one, a restomod, or a newer Land Cruiser restyled with a retro front end.
How much does a Land Cruiser restomod cost?
Press reports from 2019 to 2022 put specialist builder prices between $125,000 and more than $200,000. Ask each builder for a current quote.
What is a Renoca?
Renoca is FLEX’s line of renovated Land Cruisers. We fit a retro-style front end to a used Land Cruiser 80 or 100 Series, repaint it, and refresh the interior. The drivetrain stays stock.
Is a Renoca a restomod?
Not in the usual sense. A restomod modernizes an old truck. A Renoca gives a newer truck a classic look.
Can I convert my own Land Cruiser into a Renoca?
Yes. You can bring in a Land Cruiser 80 or 100 Series, or a Lexus LX 450 or LX 470. As of November 2026, conversion pricing starts at $22,000.
Can I import a classic Land Cruiser from Japan?
Yes, if the vehicle is at least 25 years old. That covers every 60 and 80 Series truck sold new in Japan and many 70 Series trucks.
Conclusion
A retro Land Cruiser can be four very different purchases. An original is the collector’s choice. A restoration is an original made new again. A restomod gives you both the look and modern mechanical parts at a six-figure price. A Renoca is the practical one: classic style on a newer Land Cruiser that you can drive every day.
Start with how you will use the truck, and the right option usually picks itself.
Looking for a JDM of your dream?
As one of the top Land Cruiser vendors in Japan, our specialists will assist you to acquire your dream vehicles.




