Toyota Tundra is one fantastic pickup truck, that’s for sure. For instance, have a look at the 2025 Toyota Tundra, its sleek exterior lines, and robust 4×4 suspension make it perfect for nearly all types of terrain.
However, since it has tons of mechanical and electrical components, its maintenance light or sometimes even the check engine light can turn on. Usually, these lights indicate a certain signal to the pickup truck owner.
But sometimes, owners find it tough to get rid of these lights despite a clear mechanical and electrical system record.
Dont worry! Our experts have debunked the common Tundra’s community query “How do I reset the maintenance light on a Toyota Tundra?” So, let’s jump into this guide and explore all the possible fixes!
How Do I Reset The Maintenance Light On Toyota Tundra? (2018 Onward Models)
For 2018 onwards Tundra’s, resetting the maintenance light is a breeze. That’s because you can literally eliminate this warning light in a matter of seconds. Here is the step-by-step process explained!
Step 1:
Jump into the vehicle maintenance setting from the multi-information display.
Step 2:
Select the “maintenance reset” option. This holds the complete maintenance record from the last reset trip.
Step 3:
Press “Yes”, and the maintenance light won’t appear from now onwards.
Reset Maintenance Light Toyota Tundra – 2007-2017 Models
Most Americans own the 2007 to 2017 model Toyota Tundra. However, like the newer models, they also have the same maintenance light system which turns on every 5000 miles since the last reset. Anyhow, here is the step-by-step process explained to get rid of this warning light.
Step 1:
Simply turn the ignition on, don’t start the engine, just keep the ignition in the “on” position. In case you have a push-start Tundra, just press the Engine Start/Stop button without holding the brake.
Step 2:
Now, select the “Trip A” by clicking the trip button. It should display “Trip A” on the multi-information display.
Step 3:
Turn the ignition off. Don’t press any button for this step.
Step 4:
Now, hold the Trip button and turn on the ignition again. Don’t start the engine. Keep on holding the trip button, it should erase all maintenance data and the oil change warning light will turn off. Simply start your Tundra and there shouldn’t be an oil change light on.
Reset Maintenance Light Toyota Tundra – 2000-2006 Models
Don’t worry, from 2000 till 2006 onward Tundra owners won’t be left behind in this guide. Here is the step-by-step process explained to eliminate the oil change warning light.
Step 1:
Turn on the ignition, and hold the key in this position. There is no need to start the engine.
Step 2:
Use the Trip button and go to the odometer reading from the multi-information display. Turn the ignition off.
Step 3:
Now hold the trip button and turn on the ignition without starting the engine. Doing this will set the trip meter to zero.
Step 4:
Setting the trip meter to zero erases all previous maintenance records. Start the engine, and the maintenance check light should be off.
Resetting Maintenance Light On Toyota Tundra – Troubleshooting And Their Fixes
That’s the whole process for the common query “How to reset the maintenance light on a Toyota Tundra”. We explained the complete process in various steps for your ease. In case you are still unable to get rid of the oil change light on the Toyota Tundra, here are some possible fixes:
1: Consider Disconnecting The Battery Terminals
In case these steps fall short of turning off the maintenance light, you can consider disconnecting the battery for a few seconds. Reconnect it and turn on the ignition, the warning light should turn off.
Disconnecting the battery terminals resets the ECU, which helps clear warning lights.2: Visit a Toyota Dealership
If all of this doesn’t help reset the maintenance light on the Toyota Tundra, visiting the nearest Toyota dealership is the only option left behind. Mechanics at Toyota best know their vehicles, so they can diagnose better. In such a scenario, avoid seeking assistance from roadside mechanics.
Reset Maintenance Light Toyota Tundra – Why Is It Needed?
The maintenance light, commonly referred to as the oil change light, turns on every 5000 miles. As the name suggests, it is a soft reminder to the owner to change the oil. The light turns off when the maintenance record is reset (which the dealership does for you).
In case you prefer to change the Tundra’s engine oil yourself, you’ll have to reset the maintenance record yourself.
That’s the whole point of the maintenance light on the Toyota Tundra. It is different than the typical check engine light, which usually indicates a possible problem with the engine.
Final Thoughts
So, that’s how you can reset the maintenance light on a Toyota Tundra. We have explained the whole process in simple and easy-to-understand steps. Further, we have covered the diagnostics for almost all Tundra models.
This should help you get rid of the maintenance light on your Toyota Tundra. In case, you are unable to do so, it is best to visit the nearest Toyota Authorized Dealership.
Flex Automotive ensures your ride, whether it’s a Toyota Tundra or a Land Cruiser stands out. We customize various Toyota vehicles to meet our clients’ demands. Interested in revamping your Tundra? Get in touch with our experts to make your Tundra the next head-turner on the road.
Frequently Asked Questions
1: How do I manually reset my maintenance light?
To reset the maintenance light on your Toyota Tundra, first turn the car on without starting the engine. Change the dashboard display to “TRIP A,” then switch the car off while holding the “ODO/TRIP” button down. Next, turn the car back on without starting the engine and keep holding the “ODO/TRIP” button down for 10 seconds. The maintenance light should be reset.
2: Why Is My Check Engine Light On In My Tundra?
Check engine light turns on in Tundra when there is a possible issue with either the head gasket (possibly leakage), faulty sensors (like oxygen sensor), or old spark plugs. It is best to get your Tundra examined by a Toyota Specialist.
3: How To Reset The Check Engine Light Without Disconnecting Battery Toyota?
Turn the ignition on and off for at least 3 times. Make sure you take a gap of 1 second before turning off and on the ignition. Some users have reported that this method helped them get rid of the check engine light. However, it is advised to visit the nearest Toyota Authorized Dealership for a thorough vehicle check-up.
4: What Is The Triangle Warning Light On My Toyota Tundra?
A triangle warning light is something to avoid on Toyota Tundra. It mainly indicates a major issue with the vehicle’s engine. Sometimes, it can be a minor issue but that really depends on various factors. In this case, it is advised to visit the nearest Toyota Authorized Dealership.
